Checked content

Nickel

Related subjects: Chemical elements

Background to the schools Wikipedia

This Wikipedia selection is available offline from SOS Children for distribution in the developing world. All children available for child sponsorship from SOS Children are looked after in a family home by the charity. Read more...

Nickel
28Ni
-

Ni

Pd
cobaltnickelcopper
Appearance
lustrous, metallic, and silver with a gold tinge
A pitted and lumpy piece of silvery metal, with the top surface cut flat
General properties
Name, symbol, number nickel, Ni, 28
Pronunciation / ˈ n ɪ k əl / NIK-əl
Element category transition metal
Group, period, block 10, 4, d
Standard atomic weight 58.6934(4)(2)
Electron configuration [Ar] 4s2 3d8 or [Ar] 4s1 3d9 (see text)
2, 8, 16, 2 or 2, 8, 17, 1
Electron shells of nickel (2, 8, 16, 2 or 2, 8, 17, 1)
History
Discovery Axel Fredrik Cronstedt (1751)
First isolation Axel Fredrik Cronstedt (1751)
Physical properties
Phase solid
Density (near r.t.) 8.908 g·cm−3
Liquid density at m.p. 7.81 g·cm−3
Melting point 1728 K, 1455 °C, 2651 °F
Boiling point 3186 K, 2913 °C, 5275 °F
Heat of fusion 17.48 kJ·mol−1
Heat of vaporization 377.5 kJ·mol−1
Molar heat capacity 26.07 J·mol−1·K−1
Vapor pressure
P (Pa) 1 10 100 1 k 10 k 100 k
at T (K) 1783 1950 2154 2410 2741 3184
Atomic properties
Oxidation states 4, 3, 2, 1, -1
(mildly basic oxide)
Electronegativity 1.91 (Pauling scale)
Ionization energies
( more)
1st: 737.1 kJ·mol−1
2nd: 1753.0 kJ·mol−1
3rd: 3395 kJ·mol−1
Atomic radius 124 pm
Covalent radius 124±4 pm
Van der Waals radius 163 pm
Miscellanea
Crystal structure face-centered cubic
Nickel has a face-centered cubic crystal structure
Magnetic ordering ferromagnetic
Electrical resistivity (20 °C) 69.3 nΩ·m
Thermal conductivity 90.9 W·m−1·K−1
Thermal expansion (25 °C) 13.4 µm·m−1·K−1
Speed of sound (thin rod) ( r.t.) 4900 m·s−1
Young's modulus 200 GPa
Shear modulus 76 GPa
Bulk modulus 180 GPa
Poisson ratio 0.31
Mohs hardness 4.0
Vickers hardness 638 MPa
Brinell hardness 700 MPa
CAS registry number 7440-02-0
Most stable isotopes
Main article: Isotopes of nickel
iso NA half-life DM DE ( MeV) DP
58Ni 68.077% >7×1020 y β+β+ 1.9258 58Fe
59Ni trace 7.6×104 y ε - 59Co
60Ni 26.223% 60Ni is stable with 32 neutrons
61Ni 1.14% 61Ni is stable with 33 neutrons
62Ni 3.634% 62Ni is stable with 34 neutrons
63Ni syn 100.1 y β 0.0669 63Cu
64Ni 0.926% 64Ni is stable with 36 neutrons

Nickel is a chemical element with the chemical symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel belongs to the transition metals and is hard and ductile. Pure nickel shows a significant chemical activity that can be observed when nickel is powdered to maximize the exposed surface area on which reactions can occur, but larger pieces of the metal are slow to react with air at ambient conditions due to the formation of a protective oxide surface. Even then, nickel is reactive enough with oxygen so that native nickel is rarely found on Earth's surface, being mostly confined to the interiors of larger nickel–iron meteorites that were protected from oxidation during their time in space. On Earth, such native nickel is always found in combination with iron, a reflection of those elements' origin as major end products of supernova nucleosynthesis. An iron–nickel mixture is thought to compose Earth's inner core.

The use of nickel (as a natural meteoric nickel–iron alloy) has been traced as far back as 3500 BC. Nickel was first isolated and classified as a chemical element in 1751 by Axel Fredrik Cronstedt, who initially mistook its ore for a copper mineral. The element name comes from a mischievous sprite of German miner's mythology, Nickel (similar to Old Nick), that personified the fact that copper-nickel ores resisted refinement into copper. An economically important source of nickel is the iron ore limonite, which often contains 1-2% nickel. Nickel's other important ore minerals include garnierite, and pentlandite. Major production sites include Sudbury region in Canada (which is thought to be of meteoric origin), New Caledonia in the Pacific and Norilsk in Russia.

Because of nickel's slow rate of oxidation at room temperature, it is considered corrosion-resistant. Historically this has led to its use for plating metals such as iron and brass, to its use for chemical apparatus, and its use in certain alloys that retain a high silvery polish, such as German silver. About 6% of world nickel production is still used for corrosion-resistant pure-nickel plating. Nickel was once a common component of coins, but has largely been replaced by cheaper iron for this purpose, especially since the metal is a skin allergen for some people.

Nickel is one of four elements that are ferromagnetic around room temperature. Alnico permanent magnets based partly on nickel are of intermediate strength between iron-based permanent magnets and rare-earth magnets. The metal is chiefly valuable in the modern world for the alloys it forms; about 60% of world production is used in nickel-steels (particularly stainless steel). Other common alloys, as well as some new superalloys, make up most of the remainder of world nickel use, with chemical uses for nickel compounds consuming less than 3% of production. As a compound, nickel has a number of niche chemical manufacturing uses, such as a catalyst for hydrogenation. Enzymes of some microorganisms and plants contain nickel as an active site, which makes the metal an essential nutrient for them.

Characteristics

Atomic and physical properties

Nickel is a silvery-white metal with a slight golden tinge that takes a high polish. It is one of only four elements that are magnetic at or near room temperature, the others being iron, cobalt and gadolinium. Its Curie temperature is 355 °C, meaning that bulk nickel is non-magnetic above this temperature. The unit cell of nickel is a face centered cube with the lattice parameter of 0.352 nm giving an atomic radius of 0.124 nm. Nickel belongs to the transition metals and is hard and ductile.

Electron configuration dispute

The nickel atom has two electron configurations, [Ar] 4s2 3d8 and [Ar] 4s1 3d9, which are very close in energy, where the symbol [Ar] refers to the argon-like core structure. There is some disagreement as to which should be considered the lowest energy configuration. Chemistry textbooks quote the electron configuration of nickel as [Ar] 4s2 3d8, or equivalently as [Ar] 3d8 4s2. This configuration agrees with the Madelung energy ordering rule, which predicts that 4s is filled before 3d. It is supported by the experimental fact that the lowest energy state of the nickel atom is a 4s2 3d8 energy level, specifically the 3d8(3F) 4s2 3F, J = 4 level.

However each of these two configurations in fact gives rise to a set of states at different energies. The two sets of energies overlap, and the average energy of states having configuration [Ar] 4s1 3d9 is in fact lower than the average energy of states having configuration [Ar] 4s2 3d8. For this reason the research literature on atomic calculations quotes the ground state configuration of nickel as 4s1 3d9.

Isotopes

Naturally occurring nickel is composed of 5 stable isotopes; 58Ni, 60Ni, 61Ni, 62Ni and 64Ni with 58Ni being the most abundant (68.077% natural abundance). 62Ni is the most stable nuclide of all the existing elements, with binding energy greater than both 56Fe, often incorrectly cited as most stable, and 58Fe. 18 radioisotopes have been characterised with the most stable being 59Ni with a half-life of 76,000 years, 63Ni with a half-life of 100.1 years, and 56Ni with a half-life of 6.077 days. All of the remaining radioactive isotopes have half-lives that are less than 60 hours and the majority of these have half-lives that are less than 30 seconds. This element also has one meta state.

Nickel-56 is produced by the silicon burning process and later set free in large quantities during type Ia supernovae. The shape of the light curve of these supernovae at intermediate to late-times corresponds to the decay via electron capture of nickel-56 to cobalt-56 and ultimately to iron-56. Nickel-59 is a long-lived cosmogenic radionuclide with a half-life of 76,000 years. 59Ni has found many applications in isotope geology. 59Ni has been used to date the terrestrial age of meteorites and to determine abundances of extraterrestrial dust in ice and sediment. Nickel-60 is the daughter product of the extinct radionuclide 60Fe, which decays with a half-life of 2.6 million years. Because 60Fe has such a long half-life, its persistence in materials in the solar system at high enough concentrations may have generated observable variations in the isotopic composition of 60Ni. Therefore, the abundance of 60Ni present in extraterrestrial material may provide insight into the origin of the solar system and its early history. Nickel-62 has the highest binding energy per nucleon of any isotope for any element (8.7946 MeV/nucleon). Isotopes heavier than 62Ni cannot be formed by nuclear fusion without losing energy. 48Ni, discovered in 1999, is the most proton-rich heavy element isotope known. With 28 protons and 20 neutrons 48Ni is " double magic" (like 208Pb) and therefore unusually stable.

The isotopes of nickel range in atomic weight from 48  u (48Ni) to 78 u (78Ni). Nickel-78's half-life was recently measured at 110 milliseconds, and is believed an important isotope in supernova nucleosynthesis of elements heavier than iron.

Occurrence

Widmanstätten pattern showing the two forms of nickel-iron, Kamacite and Taenite, in an octahedrite meteorite

On Earth, nickel occurs most often in combination with sulfur and iron in pentlandite, with sulfur in millerite, with arsenic in the mineral nickeline, and with arsenic and sulfur in nickel galena. Nickel is commonly found in iron meteorites as the alloys kamacite and taenite.

The bulk of the nickel mined comes from two types of ore deposits. The first are laterites where the principal ore minerals are nickeliferous limonite: (Fe, Ni)O(OH) and garnierite (a hydrous nickel silicate): (Ni, Mg)3Si2O5(OH)4. The second are magmatic sulfide deposits where the principal ore mineral is pentlandite: (Ni, Fe)9S8.

Australia and New Caledonia have the biggest estimate reserves (45% all together).

In terms of World Resources, identified land-based resources averaging 1% nickel or greater contain at least 130 million tons of nickel (about the double of known reserves). About 60% is in laterites and 40% is in sulfide deposits.

Based on geophysical evidence, most of the nickel on Earth is postulated to be concentrated in the Earth's outer core and inner core. Kamacite and taenite are naturally occurring alloys of iron and nickel. For kamacite the alloy is usually in the proportion of 90:10 to 95:5 although impurities such as cobalt or carbon may be present, while for taenite the nickel content is between 20% and 65%. Kamacite and taenite occur in nickel iron meteorites.

Compounds

A nickel atom with four single bonds to carbonyl (carbon triple-bonded to oxygen; bonds via the carbon) groups that are laid out tetrahedrally around it
Tetracarbonyl nickel

The most common oxidation state of nickel is +2, but compounds of Ni0, Ni+, and Ni3+ are well known, and Ni4+ has been demonstrated.

Nickel(0)

Tetracarbonylnickel (Ni(CO)4), discovered by Ludwig Mond, is a volatile, highly toxic liquid at room temperature. On heating, the complex decomposes back to nickel and carbon monoxide:

Ni(CO)4 is in equilibrium with Ni + 4 CO

This behaviour is exploited in the Mond process for purifying nickel, as described above. The related nickel(0) complex bis(cyclooctadiene)nickel(0) is a useful catalyst in organonickel chemistry due to the easily displaced cod ligands.

Nickel(I)

Nickel(I) compounds and complexes are rare. The dark red diamagnetic K4[Ni2(CN)6] is a representative example of Ni(I). It is prepared by reduction of K2[Ni2(CN)6] using sodium amalgam. This compound is unstable and liberates H2 gas from water.

Structure of [Ni2(CN)6]2- ion

Nickel(II)

Colour of various Ni(II) complexes in aqueous solution. From left to right, [Ni(NH3)6]2+, [Ni( en)3]2+, [NiCl4]2-, [Ni(H2O)6]2+
A small heap of cyan crystal particles
Nickel sulfate crystals

Nickel(II) forms compounds with all common anions, i.e. the sulfide, sulfate, carbonate, hydroxide, carboxylates, and halides. Nickel(II) sulfate is produced in large quantities by dissolving nickel metal or oxides in sulfuric acid. It exists as both a hexa- and heptahydrates. This compound is useful for electroplating nickel.

The four halogens form nickel compounds, all of which adopt octahedral geometries. Nickel(II) chloride is most common, and its behaviour is illustrative of the other halides. Nickel(II) chloride is produced by dissolving nickel residues in hydrochloric acid. The dichloride is usually encountered as the green hexahydrate, but it can be dehydrated to give the yellow anhydrous NiCl2. Some tetracoordinate nickel(II) complexes form both tetrahedral and square planar geometries. The tetrahedral complexes are paramagnetic and the square planar complexes are diamagnetic. This equilibrium as well as the formation of octahedral complexes contrasts with the behaviour of the divalent complexes of the heavier group 10 metals, palladium(II) and platinum(II), which tend to adopt only square-planar complexes.

Nickelocene is known; it has an electron count of 20, making it relatively unstable.

Nickel(III) antimonide

Nickel(III) and (IV)

For simple compounds, nickel(III) and nickel(IV) only occurs with fluoride and oxides, with the exception of KNiIO6, which can be considered as a formal salt of the [IO6]5- ion. Ni(IV) is present in the mixed oxide BaNiO3, while Ni(III) is present in nickel(III) oxide, which is used as the cathode in many rechargeable batteries, including nickel-cadmium, nickel-iron, nickel hydrogen, and nickel-metal hydride, and used by certain manufacturers in Li-ion batteries. Nickel(III) can be stabilized by σ-donor ligands such as thiols and phosphines.

History

Because the ores of nickel are easily mistaken for ores of silver, understanding of this metal and its use dates to relatively recent times. However, the unintentional use of nickel is ancient, and can be traced back as far as 3500 BC. Bronzes from what is now Syria had contained up to 2% nickel. Further, there are Chinese manuscripts suggesting that "white copper" ( cupronickel, known as baitong) was used there between 1700 and 1400 BC. This Paktong white copper was exported to Britain as early as the 17th century, but the nickel content of this alloy was not discovered until 1822.

In medieval Germany, a red mineral was found in the Erzgebirge (Ore Mountains) that resembled copper ore. However, when miners were unable to extract any copper from it, they blamed a mischievous sprite of German mythology, Nickel (similar to Old Nick), for besetting the copper. They called this ore Kupfernickel from the German Kupfer for copper. This ore is now known to be nickeline or niccolite, a nickel arsenide. In 1751, Baron Axel Fredrik Cronstedt was trying to extract copper from kupfernickel—and instead produced a white metal that he named after the spirit that had given its name to the mineral, nickel. In modern German, Kupfernickel or Kupfer-Nickel designates the alloy cupronickel.

After its discovery, the only source for nickel was the rare Kupfernickel but, from 1824 on, the nickel was obtained as a byproduct of cobalt blue production. The first large-scale producer of nickel was Norway, which exploited nickel-rich pyrrhotite from 1848 on. The introduction of nickel in steel production in 1889 increased the demand for nickel, and the nickel deposits of New Caledonia, which were discovered in 1865, provided most of the world's supply between 1875 and 1915. The discovery of the large deposits in the Sudbury Basin, Canada in 1883, in Norilsk-Talnakh, Russia in 1920, and in the Merensky Reef, South Africa in 1924 made large-scale production of nickel possible.

Dutch coins made of pure nickel

Nickel has been a component of coins since the mid-19th century. In the United States, the term "nickel" or "nick" originally applied to the copper-nickel Flying Eagle cent, which replaced copper with 12% nickel 1857–58, then the Indian Head cent of the same alloy from 1859–1864. Still later in 1865, the term designated the three-cent nickel, with nickel increased to 25%. In 1866, the five-cent shield nickel (25% nickel, 75% copper) appropriated the designation. Along with the alloy proportion, this term has been used to the present in the United States. Coins of nearly pure nickel were first used in 1881 in Switzerland, and more notably 99.9% nickel five-cent coins were struck in Canada (the world's largest nickel producer at the time) during non-war years from 1922–1981, and their metal content made these coins magnetic. During the wartime period 1942–45, more or all nickel was removed from Canadian and U.S. coins, due to nickel's war-critical use in armor. Canada switched alloys again to plated steel during the Korean war, but was forced to stop making pure nickel "nickels" in 1981, reserving the pure 99.9% nickel alloy after 1968 only to its higher-value coins. Finally, in the 21st century, with rising nickel prices, most countries that formerly used nickel in their coins have abandoned the metal for cost reasons, and the U.S. five cents remains one of the few coins that still uses the metal for anything other than exterior plating.

World production

World nickel production in metric tons, in 2005. The Russian Federation is the largest producer, followed by Canada.
Mine production and reserves 2010 2011 Reserves
Australia 170,000 180,000 24,000,000
Botswana 28,000 32,000 490,000
Brazil 59,100 83,000 8,700,000
Canada 158,000 200,000 3,300,000
China 79,000 80,000 3,000,000
Colombia 72,000 72,000 720,000
Cuba 70,000 74,000 5,500,000
Dominican Republic 0 14,000 1,000,000
Indonesia 232,000 230,000 3,900,000
Madagascar 15,000 25,000 1,600,000
New Caledonia 130,000 140,000 12,000,000
Philippines 173,000 230,000 1,100,000
Russia 269,000 280,000 6,000,000
South Africa 40,000 42,000 3,700,000
Other countries 99,000 100,000 4,600,000
World total (metric tons, rounded) 1,590,000 1,800,000 80,000,000

In 2011, Russia was the largest producer of nickel with about one-fifth world share closely followed by Canada, Australia, and Indonesia and Philippines, as reported by the US Geological Survey. The largest deposits of nickel in non-Russian Europe are located in Finland and the second largest in Greece. A nickel deposit in western Turkey had been exploited, with this location being especially convenient for European smelters, steelmakers, and factories.

Identified land-based resources averaging 1% nickel or greater contain at least 130 million tons of nickel. About 60% is in laterites and 40% is in sulfide deposits. In addition, extensive deep-sea resources of nickel are in manganese crusts and nodules covering large areas of the ocean floor, particularly in the Pacific Ocean.

The one locality in the United States where nickel was commercially mined is Riddle, Oregon, where several square miles of nickel-bearing garnierite surface deposits are located. The mine closed in 1987. The Eagle mine project is a proposed new nickel mine in Michigan's upper peninsula.

Extraction and purification

Nickel is recovered through extractive metallurgy. Nickel is extracted from its ores by conventional roasting and reduction processes that yield a metal of greater than 75% purity. In many stainless steel applications, 75% pure nickel can be used without further purification, depending on the composition of the impurities.

Most sulfide ores have traditionally been processed using pyrometallurgical techniques to produce a matte for further refining. Recent advances in hydrometallurgy have resulted in significant nickel purification using these processes. Most sulfide deposits have traditionally been processed by concentration through a froth flotation process followed by pyrometallurgical extraction. In hydrometallurgical processes, nickel sulfide ores undergo flotation (differential flotation if Ni/Fe ratio is too low) and then smelted. After producing the nickel matte, further processing is done via the Sherritt-Gordon process. First, copper is removed by adding hydrogen sulfide, leaving a concentrate of only cobalt and nickel. Then, solvent extraction is used to separate the cobalt and nickel, with the final nickel concentration greater than 99%.

Electrolytically refined nickel nodule, with visible green, crystallized nickel-electrolyte salts in the pores.

Electrorefining

A second common form of further refining involves the leaching of the metal matte into a nickel salt solution, followed by the electro-winning of the nickel from solution by plating it onto a cathode as electrolytic nickel.

Mond process

Highly purified nickel spheres made by the Mond process.

Purification of nickel oxides to obtain the purest metal is performed via the Mond process, which increases the nickel concentrate to greater than 99.99% purity. This process was patented by L. Mond and has been in industrial use since before the beginning of the 20th century. In the process, nickel is reacted with carbon monoxide at around 40–80 °C to form nickel carbonyl in the presence of a sulfur catalyst. Iron gives iron pentacarbonyl too, but this reaction is slow. If necessary, it may be separated by distillation. Dicobalt octacarbonyl is also formed in this process, but it decomposes to tetracobalt dodecacarbonyl at the reaction temperature to give a non-volatile solid.

Nickel is re-obtained from the nickel carbonyl by one of two processes. It may be passed through a large chamber at high temperatures in which tens of thousands of nickel spheres, called pellets, are constantly stirred. It then decomposes depositing pure nickel onto the nickel spheres. Alternatively, the nickel carbonyl may be decomposed in a smaller chamber at 230 °C to create fine nickel powder. The resultant carbon monoxide is re-circulated and reused through the process. The highly pure nickel produced by this process is known as "carbonyl nickel".

Metal value

The market price of nickel surged throughout 2006 and the early months of 2007; as of April 5, 2007, the metal was trading at 52,300 USD/ tonne or 1.47 USD/oz. The price subsequently fell dramatically from these peaks, and as of 19 January 2009 the metal was trading at 10,880 USD/tonne.

The US nickel coin contains 0.04 oz (1.25 g) of nickel, which at the April 2007 price was worth 6.5 cents, along with 3.75 grams of copper worth about 3 cents, making the metal value over 9 cents. Since the face value of a nickel is 5 cents, this made it an attractive target for melting by people wanting to sell the metals at a profit. However, the United States Mint, in anticipation of this practice, implemented new interim rules on December 14, 2006, subject to public comment for 30 days, which criminalize the melting and export of cents and nickels. Violators can be punished with a fine of up to $10,000 and/or imprisoned for a maximum of five years.

As of September 16, 2011, the melt value of a U.S. nickel is $0.0600409, which is 20% higher than the face value.

Applications

Nickel superalloy jet engine ( RB199) turbine blade

The fraction of global nickel production presently used for various applications is as follows: 46% for making nickel steels; 34% in nonferrous alloys and superalloys; 14% electroplating, and 6% into other uses.

Nickel is used in many specific and recognizable industrial and consumer products, including stainless steel, alnico magnets, coinage, rechargeable batteries, electric guitar strings, microphone capsules, and special alloys. It is also used for plating and as a green tint in glass. Nickel is preeminently an alloy metal, and its chief use is in the nickel steels and nickel cast irons, of which there are many varieties. It is also widely used in many other alloys, such as nickel brasses and bronzes, and alloys with copper, chromium, aluminium, lead, cobalt, silver, and gold ( Inconel, Incoloy, Monel, Nimonic).

A "horseshoe magnet" made of alnico nickel alloy. The composition of alnico alloys is typically 8–12% Al, 15–26% Ni, 5–24% Co, up to 6% Cu, up to 1% Ti, and the balance is Fe. The development of alnico began in 1931 when it was discovered that an alloy of iron, nickel, and aluminium had a coercivity double that of the best magnet steels of the time. Alnico magnets are now being replaced by rare earth magnets in many applications

Because of its resistance to corrosion, nickel has been occasionally used historically as a substitute for decorative silver. Nickel was also occasionally used in some countries after 1859 as a cheap coinage metal (see above) but beginning the later years of the 20th century has largely replaced by cheaper stainless steel (i.e., iron) alloys, except notably in the United States.

Nickel is an excellent alloying agent for certain other precious metals, and so used in the so-called fire assay, as a collector of platinum group elements (PGE). As such, nickel is capable of full collection of all 6 PGE elements from ores, in addition to partial collection of gold. High-throughput nickel mines may also engage in PGE recovery (primarily platinum and palladium); examples are Norilsk in Russia and the Sudbury Basin in Canada.

Nickel foam or nickel mesh is used in gas diffusion electrodes for alkaline fuel cells.

Nickel and its alloys are frequently used as catalysts for hydrogenation reactions. Raney nickel, a finely divided nickel-aluminium alloy, is one common form, however related catalysts are also often used, including related 'Raney-type' catalysts.

Nickel is a naturally magnetostrictive material, meaning that, in the presence of a magnetic field, the material undergoes a small change in length. In the case of nickel, this change in length is negative (contraction of the material), which is known as negative magnetostriction and is on the order of 50 ppm.

Nickel is used as a binder in the cemented tungsten carbide or hardmetal industry and used in proportions of six to 12% by weight. Nickel can make the tungsten carbide magnetic and adds corrosion-resistant properties to the cemented tungsten carbide parts, although the hardness is lower than those of parts made with cobalt binder.

Biological role

Although not recognized until the 1970s, nickel plays important roles in the biology of microorganisms and plants. The plant enzyme urease (an enzyme that assists in the hydrolysis of urea) contains nickel. The NiFe- hydrogenases contain nickel in addition to iron-sulfur clusters. Such [NiFe]-hydrogenases characteristically oxidise H2. A nickel-tetrapyrrole coenzyme, Cofactor F430, is present in the methyl coenzyme M reductase, which powers methanogenic archaea. One of the carbon monoxide dehydrogenase enzymes consists of an Fe-Ni-S cluster. Other nickel-containing enzymes include a rare bacterial class of superoxide dismutase and glyoxalase I enzymes in bacteria and several parasitic eukaryotic trypanosomal parasites (this enzyme in higher organisms, including yeast and mammals, uses divalent zinc, Zn2+).

Toxicity

In the US, the minimal risk level of nickel and its compounds is set to 0.2 µg/m3 for inhalation during 15–364 days. Nickel sulfide fume and dust are believed carcinogenic, and various other nickel compounds may be as well. Nickel carbonyl, [Ni(CO)4], is an extremely toxic gas. The toxicity of metal carbonyls is a function of both the toxicity of the metal as well as the carbonyl's ability to give off highly toxic carbon monoxide gas, and this one is no exception; nickel carbonyl is also explosive in air. Sensitized individuals may show an allergy to nickel, affecting their skin, also known as dermatitis. Sensitivity to nickel may also be present in patients with pompholyx. Nickel is an important cause of contact allergy, partly due to its use in jewellery intended for pierced ears. Nickel allergies affecting pierced ears are often marked by itchy, red skin. Many earrings are now made nickel-free due to this problem. The amount of nickel allowed in products that come into contact with human skin is regulated by the European Union. In 2002, researchers found amounts of nickel being emitted by 1 and 2 Euro coins far in excess of those standards. This is believed due to a galvanic reaction.

Nickel was voted Allergen of the Year in 2008 by the American Contact Dermatitis Society.

Reports also showed that both the nickel-induced activation of hypoxia-inducible factor (HIF-1) and the up-regulation of hypoxia-inducible genes are due to depleted intracellular ascorbate levels. The addition of ascorbate to the culture medium increased the intracellular ascorbate level and reversed both the metal-induced stabilization of HIF-1- and HIF-1α-dependent gene expression.

Retrieved from " http://en.wikipedia.org/w/index.php?title=Nickel&oldid=546111819"