Polar coordinate system

Related subjects: Mathematics

Background to the schools Wikipedia

SOS Children offer a complete download of this selection for schools for use on schools intranets. Child sponsorship helps children one by one http://www.sponsor-a-child.org.uk/.

A polar grid with several angles labeled in degrees

In mathematics, the polar coordinate system is a two-dimensional coordinate system in which each point on a plane is determined by an angle and a distance. The polar coordinate system is especially useful in situations where the relationship between two points is most easily expressed in terms of angles and distance; in the more familiar Cartesian or rectangular coordinate system, such a relationship can only be found through trigonometric formulae.

As the coordinate system is two-dimensional, each point is determined by two polar coordinates: the radial coordinate and the angular coordinate. The radial coordinate (usually denoted as $r$ ) denotes the point's distance from a central point known as the pole (equivalent to the origin in the Cartesian system). The angular coordinate (also known as the polar angle or the azimuth angle, and usually denoted by θ or $t$ ) denotes the positive or anticlockwise (counterclockwise) angle required to reach the point from the 0° ray or polar axis (which is equivalent to the positive x-axis in the Cartesian coordinate plane).

History

The concepts of angle and radius were already used by ancient peoples of the 1st millennium BCE. The astronomer Hipparchus (190-120 BCE) created a table of chord functions giving the length of the chord for each angle, and there are references to his using polar coordinates in establishing stellar positions. In On Spirals, Archimedes describes the Archimedean spiral, a function whose radius depends on the angle. The Greek work, however, did not extend to a full coordinate system.

There are various accounts of the introduction of polar coordinates as part of a formal coordinate system. The full history of the subject is described in Harvard professor Julian Lowell Coolidge's Origin of Polar Coordinates. Grégoire de Saint-Vincent and Bonaventura Cavalieri independently introduced the concepts in the mid-seventeenth century. Saint-Vincent wrote about them privately in 1625 and published his work in 1647, while Cavalieri published his in 1635 with a corrected version appearing in 1653. Cavalieri first used polar coordinates to solve a problem relating to the area within an Archimedean spiral. Blaise Pascal subsequently used polar coordinates to calculate the length of parabolic arcs.

In Method of Fluxions (written 1671, published 1736), Sir Isaac Newton examined the transformations between polar coordinates, which he referred to as the "Seventh Manner; For Spirals", and nine other coordinate systems. In the journal Acta Eruditorum (1691), Jacob Bernoulli used a system with a point on a line, called the pole and polar axis respectively. Coordinates were specified by the distance from the pole and the angle from the polar axis. Bernoulli's work extended to finding the radius of curvature of curves expressed in these coordinates.

The actual term polar coordinates has been attributed to Gregorio Fontana and was used by 18th-century Italian writers. The term appeared in English in George Peacock's 1816 translation of Lacroix's Differential and Integral Calculus. Alexis Clairaut was the first to think of polar coordinates in three dimensions, and Leonhard Euler was the first to actually develop them.

Plotting points with polar coordinates

The points (3,60°) and (4,210°) on a polar coordinate system

Each point in the polar coordinate system can be described with the two polar coordinates, which are usually called $r$ (the radial coordinate) and θ (the angular coordinate, polar angle, or azimuth angle, sometimes represented as φ or $t$ ). The $r$ coordinate represents the radial distance from the pole, and the θ coordinate represents the anticlockwise (counterclockwise) angle from the 0° ray (sometimes called the polar axis), known as the positive x-axis on the Cartesian coordinate plane.

For example, the polar coordinates (3, 60°) would be plotted as a point 3 units from the pole on the 60° ray. The coordinates (−3, 240°) would also be plotted at this point because a negative radial distance is measured as a positive distance on the opposite ray (the ray reflected about the origin, which differs from the original ray by 180°).

One important aspect of the polar coordinate system, not present in the Cartesian coordinate system, is that a single point can be expressed with an infinite number of different coordinates. This is because any number of multiple revolutions can be made around the central pole without affecting the actual location of the point plotted. In general, the point ( $r$ , θ) can be represented as ( $r$ , θ ± $n$ ×360°) or (− $r$ , θ ± (2 $n$ + 1)180°), where $n$ is any integer.

The arbitrary coordinates (0, θ) are conventionally used to represent the pole, as regardless of the θ coordinate, a point with radius 0 will always be on the pole. To get a unique representation of a point, it is usual to limit $r$ to non-negative numbers $r$ ≥ 0 and θ to the interval [0, 360°) or (−180°, 180°] (or, in radian measure, [0, 2π) or (−π, π]).

Angles in polar notation are generally expressed in either degrees or radians, using the conversion 2π rad = 360°. The choice depends largely on the context. Navigation applications use degree measure, while some physics applications (specifically rotational mechanics) and almost all mathematical literature on calculus use radian measure.

Converting between polar and Cartesian coordinates

A diagram illustrating the relationship between polar and Cartesian coordinates.

The two polar coordinates $r$ and θ can be converted to the Cartesian coordinates $x$ and $y$ by using the trigonometric functions sine and cosine:

$x = r \cos \theta \,$

$y = r \sin \theta, \,$

while the two Cartesian coordinates $x$ and $y$ can be converted to polar coordinate $r$ by

$r = \sqrt{x^2 + y^2} \,$ (by a simple application of the Pythagorean theorem).

To determine the angular coordinate θ, the following two ideas must be considered:

For $r$ = 0, θ can be set to any real value.
For $r$ ≠ 0, to get a unique representation for θ, it must be limited to an interval of size 2π. Conventional choices for such an interval are [0, 2π) and (−π, π].

To obtain θ in the interval [0, 2π), the following may be used ( $\arctan$ denotes the inverse of the tangent function):

$\theta = \begin{cases} \arctan(\frac{y}{x}) & \mbox{if } x > 0 \mbox{ and } y \ge 0\\ \arctan(\frac{y}{x}) + 2\pi & \mbox{if } x > 0 \mbox{ and } y < 0\\ \arctan(\frac{y}{x}) + \pi & \mbox{if } x < 0\\ \frac{\pi}{2} & \mbox{if } x = 0 \mbox{ and } y > 0\\ \frac{3\pi}{2} & \mbox{if } x = 0 \mbox{ and } y < 0 \end{cases}$

To obtain θ in the interval (−π, π], the following may be used:

$\theta = \begin{cases} \arctan(\frac{y}{x}) & \mbox{if } x > 0\\ \arctan(\frac{y}{x}) + \pi & \mbox{if } x < 0 \mbox{ and } y \ge 0\\ \arctan(\frac{y}{x}) - \pi & \mbox{if } x < 0 \mbox{ and } y < 0\\ \frac{\pi}{2} & \mbox{if } x = 0 \mbox{ and } y > 0\\ -\frac{\pi}{2} & \mbox{if } x = 0 \mbox{ and } y < 0 \end{cases}$

One may avoid having to keep track of the numerator and denominator signs by use of the atan2 function, which has separate arguments for the numerator and the denominator.

Polar equations

The equation defining an algebraic curve expressed in polar coordinates is known as a polar equation. In many cases, such an equation can simply be specified by defining $r$ as a function of θ. The resulting curve then consists of points of the form ( $r$ (θ), θ) and can be regarded as the graph of the polar function $r$ .

Different forms of symmetry can be deduced from the equation of a polar function $r$ . If $r$ (−θ) = $r$ (θ) the curve will be symmetrical about the horizontal (0°/180°) ray, if $r$ (π−θ) = $r$ (θ) it will be symmetric about the vertical (90°/270°) ray, and if $r$ (θ−α°) = $r$ (θ) it will be rotationally symmetric α° counterclockwise about the pole.

Because of the circular nature of the polar coordinate system, many curves can be described by a rather simple polar equation, whereas their Cartesian form is much more intricate. Among the best known of these curves are the polar rose, Archimedean spiral, lemniscate, limaçon, and cardioid.

For the circle, line, and polar rose below, it is understood that there are no restrictions on the domain and range of the curve.

Circle

A circle with equation $r$ (θ) = 1

The general equation for a circle with a centre at ( $r$ ₀, φ) and radius $a$ is

$r^2 - 2 r r_0 \cos(\theta - \varphi) + r_0^2 = a^2.\,$

This can be simplified in various ways, to conform to more specific cases, such as the equation

$r(\theta)=a \,$

for a circle with a centre at the pole and radius $a$ .

Line

Radial lines (those running through the pole) are represented by the equation

$\theta = \varphi \,$ ,

where φ is the angle of elevation of the line; that is, φ = arctan $m$ where $m$ is the slope of the line in the Cartesian coordinate system. The non-radial line that crosses the radial line θ = φ perpendicularly at the point ( $r$ ₀, φ) has the equation

$r(\theta) = {r_0}\sec(\theta-\varphi). \,$

Polar rose

A polar rose with equation $r$ (θ) = 2 sin 4θ

A polar rose is a famous mathematical curve that looks like a petalled flower, and that can be expressed as a simple polar equation,

$r(\theta) = a \cos (k\theta + \phi_0)\,$

for any constant $\phi_0$ (including 0). If k is an integer, these equations will produce a k-petalled rose if k is odd, or a 2k-petalled rose if k is even. If k is rational but not an integer, a rose-like shape may form but with overlapping petals. Note that these equations never define a rose with 2, 6, 10, 14, etc. petals. The variable a represents the length of the petals of the rose.

Archimedean spiral

One arm of an Archimedean spiral with equation r(θ) = θ for 0 < θ < 6π

The Archimedean spiral is a famous spiral that was discovered by Archimedes, which also can be expressed as a simple polar equation. It is represented by the equation

$r(\theta) = a+b\theta. \,$

Changing the parameter a will turn the spiral, while b controls the distance between the arms, which for a given spiral is always constant. The Archimedean spiral has two arms, one for θ > 0 and one for θ < 0. The two arms are smoothly connected at the pole. Taking the mirror image of one arm across the 90°/270° line will yield the other arm. This curve is notable as one of the first curves, after the conic sections, to be described in a mathematical treatise, and as being a prime example of a curve that is best defined by a polar equation.

Conic sections

Ellipse, showing semi-latus rectum

A conic section with one focus on the pole and the other somewhere on the 0° ray (so that the conic's major axis lies along the polar axis) is given by:

$r = { \ell\over {1 + e \cos \theta}}$

where e is the eccentricity and $\ell$ is the semi-latus rectum (the perpendicular distance at a focus from the major axis to the curve). If e > 1, this equation defines a hyperbola; if e = 1, it defines a parabola; and if e < 1, it defines an ellipse. The special case e = 0 of the latter results in a circle of radius $\ell$ .

Complex numbers

An illustration of a complex number z plotted on the complex plane

An illustration of a complex number plotted on the complex plane using Euler's formula

Every complex number can be represented as a point in the complex plane, and can therefore be expressed by specifying either the point's Cartesian coordinates (called rectangular or Cartesian form) or the point's polar coordinates (called polar form). The complex number z can be represented in rectangular form as

$z = x + iy\,$

where i is the imaginary unit, or can alternatively be written in polar form (via the conversion formulae given above) as

$z = r\cdot(\cos\theta+i\sin\theta)$

and from there as

$z = re^{i\theta} \,$

where e is Euler's number, which are equivalent as shown by Euler's formula. (Note that this formula, like all those involving exponentials of angles, assumes that the angle θ is expressed in radians.) To convert between the rectangular and polar forms of a complex number, the conversion formulae given above can be used.

For the operations of multiplication, division, and exponentiation of complex numbers, it is generally much simpler to work with complex numbers expressed in polar form rather than rectangular form. From the laws of exponentiation:

Multiplication:

$r_0 e^{i\theta_0} \cdot r_1 e^{i\theta_1}=r_0 r_1 e^{i(\theta_0 + \theta_1)} \,$

Division:

$\frac{r_0 e^{i\theta_0}}{r_1 e^{i\theta_1}}=\frac{r_0}{r_1}e^{i(\theta_0 - \theta_1)} \,$

Exponentiation ( De Moivre's formula):

$(re^{i\theta})^n=r^ne^{in\theta} \,$

Calculus

Calculus can be applied to equations expressed in polar coordinates.

The angular coordinate θ is expressed in radians throughout this section, which is the conventional choice when doing calculus.

Differential calculus

We have the following formulas:

$r \tfrac{\partial}{\partial r}= x \tfrac{\partial}{\partial x} + y \tfrac{\partial}{\partial y} \,$

$\tfrac{\partial}{\partial \theta} = -y \tfrac{\partial}{\partial x} + x \tfrac{\partial}{\partial y} .$

To find the Cartesian slope of the tangent line to a polar curve r(θ) at any given point, the curve is first expressed as a system of parametric equations.

$x=r(\theta)\cos\theta \,$

$y=r(\theta)\sin\theta \,$

Differentiating both equations with respect to θ yields

$\frac{dx}{d\theta}=r'(\theta)\cos\theta-r(\theta)\sin\theta \,$

$\frac{dy}{d\theta}=r'(\theta)\sin\theta+r(\theta)\cos\theta \,$

Dividing the second equation by the first yields the Cartesian slope of the tangent line to the curve at the point (r, r(θ)):

$\frac{dy}{dx}=\frac{r'(\theta)\sin\theta+r(\theta)\cos\theta}{r'(\theta)\cos\theta-r(\theta)\sin\theta}$

Integral calculus

The integration region R is bounded by the curve r(θ) and the rays θ = a and θ = b.

Let R denote the region enclosed by a curve r(θ) and the rays θ = a and θ = b, where 0 < b − a < 2π. Then, the area of R is

$\frac12\int_a^b r(\theta)^2\, d\theta.$

The region R is approximated by n sectors (here, n = 5).

This result can be found as follows. First, the interval [a, b] is divided into n subintervals, where n is an arbitrary positive integer. Thus Δθ, the length of each subinterval, is equal to b − a (the total length of the interval), divided by n, the number of subintervals. For each subinterval i = 1, 2, …, n, let θ_i be the midpoint of the subinterval, and construct a sector with the centre at the pole, radius r(θ_i), central angle Δθ and arc length $r(\theta_i)\Delta\theta\,$ . The area of each constructed sector is therefore equal to $\tfrac12r(\theta_i)^2\Delta\theta$ . Hence, the total area of all of the sectors is

$\sum_{i=1}^n \tfrac12r(\theta_i)^2\,\Delta\theta.$

As the number of subintervals n is increased, the approximation of the area continues to improve. In the limit as n → ∞, the sum becomes the Riemann sum for the above integral.

Generalization

Using Cartesian coordinates, an infinitesimal area element can be calculated as dA = dx dy. The substitution rule for multiple integrals states that, when using other coordinates, the Jacobian determinant of the coordinate conversion formula has to be considered:

$J = \det\frac{\partial(x,y)}{\partial(r,\theta)} =\begin{vmatrix} \frac{\partial x}{\partial r} & \frac{\partial x}{\partial \theta} \\ \frac{\partial y}{\partial r} & \frac{\partial y}{\partial \theta} \end{vmatrix} =\begin{vmatrix} \cos\theta & -r\sin\theta \\ \sin\theta & r\cos\theta \end{vmatrix} =r\cos^2\theta + r\sin^2\theta = r.$

Hence, an area element in polar coordinates can be written as

$dA = J\,dr\,d\theta = r\,dr\,d\theta.$

Now, a function that is given in polar coordinates can be integrated as follows:

$\iint_R f(r,\theta) \, dA = \int_a^b \int_0^{r(\theta)} f(r,\theta)\,r\,dr\,d\theta.$

Here, R is the same region as above, namely, the region enclosed by a curve r(θ) and the rays θ = a and θ = b.

The formula for the area of R mentioned above is retrieved by taking f identically equal to 1. A more surprising application of this result yields the Gaussian integral

$\int_{-\infty}^\infty e^{-x^2} \, dx = \sqrt\pi.$

Vector calculus

Vector calculus can also be applied to polar coordinates. Let $\mathbf{r}$ be the position vector $(r\cos(\theta),r\sin(\theta))\,$ , with r and $\theta$ depending on time t, $\hat{\mathbf{r}}$ be a unit vector in the direction $\mathbf{r}$ and $\hat{\boldsymbol\theta}$ be a unit vector at right angles to $\mathbf{r}$ . The first and second derivatives of position are

$\frac{d\mathbf{r}}{dt} = \dot r\hat{\mathbf{r}} + r\dot\theta\hat{\boldsymbol\theta},$

$\frac{d^2\mathbf{r}}{dt^2} = (\ddot r - r\dot\theta^2)\hat{\mathbf{r}} + (r\ddot\theta + 2\dot r \dot\theta)\hat{\boldsymbol\theta}.$

Three dimensions

The polar coordinate system is extended into three dimensions with two different coordinate systems, the cylindrical and spherical coordinate systems, both of which include two-dimensional or planar polar coordinates as a subset. In essence, the cylindrical coordinate system extends polar coordinates by adding an additional distance coordinate, while the spherical system instead adds an additional angular coordinate.

Cylindrical coordinates

A point plotted with cylindrical coordinates

The cylindrical coordinate system is a coordinate system that essentially extends the two-dimensional polar coordinate system by adding a third coordinate measuring the height of a point above the plane, similar to the way in which the Cartesian coordinate system is extended into three dimensions. The third coordinate is usually denoted h, making the three cylindrical coordinates (r, θ, h).

The three cylindrical coordinates can be converted to Cartesian coordinates by

$\begin{align} x &= r \, \cos\theta \\ y &= r \, \sin\theta \\ z &= h. \end{align}$

Spherical coordinates

A point plotted using spherical coordinates

Polar coordinates can also be extended into three dimensions using the coordinates (ρ, φ, θ), where ρ is the distance from the origin, φ is the angle from the z-axis (called the colatitude or zenith and measured from 0 to 180°) and θ is the angle from the x-axis (as in the polar coordinates). This coordinate system, called the spherical coordinate system, is similar to the latitude and longitude system used for Earth, with the origin in the centre of Earth, the latitude δ being the complement of φ, determined by δ = 90° − φ, and the longitude l being measured by l = θ − 180°.

The three spherical coordinates are converted to Cartesian coordinates by

$\begin{align} x &= \rho \, \sin\phi \, \cos\theta \\ y &= \rho \, \sin\phi \, \sin\theta \\ z &= \rho \, \cos\phi. \end{align}$

Applications

Polar coordinates are two-dimensional and thus they can be used only where point positions lie on a single two-dimensional plane. They are most appropriate in any context where the phenomenon being considered is inherently tied to direction and length from a centre point. For instance, the examples above show how elementary polar equations suffice to define curves — such as the Archimedean spiral — whose equation in the Cartesian coordinate system would be much more intricate. Moreover, many physical systems — such as those concerned with bodies moving around a central point or with phenomena originating from a central point — are simpler and more intuitive to model using polar coordinates. The initial motivation for the introduction of the polar system was the study of circular and orbital motion.

Position and navigation

Polar coordinates are used often in navigation, as the destination or direction of travel can be given as an angle and distance from the object being considered. For instance, aircraft use a slightly modified version of the polar coordinates for navigation. In this system, the one generally used for any sort of navigation, the 0° ray is generally called heading 360, and the angles continue in a clockwise direction, rather than counterclockwise, as in the mathematical system. Heading 360 corresponds to magnetic north, while headings 90, 180, and 270 correspond to magnetic east, south, and west, respectively. Thus, an aircraft traveling 5 nautical miles due east will be traveling 5 units at heading 90 (read niner-zero by air traffic control).

Modeling

Systems displaying radial symmetry provide natural settings for the polar coordinate system, with the central point acting as the pole. A prime example of this usage is the groundwater flow equation when applied to radially symmetric wells. Systems with a radial force are also good candidates for the use of the polar coordinate system. These systems include gravitational fields, which obey the inverse-square law, as well as systems with point sources, such as radio antennas.

Radially asymmetric systems may also be modeled with polar coordinates. For example, a microphone's pickup pattern illustrates its proportional response to an incoming sound from a given direction, and these patterns can be represented as polar curves. The curve for a standard cardioid microphone, the most common unidirectional microphone, can be represented as r = 0.5 + 0.5 sin θ.

Retrieved from " http://en.wikipedia.org/w/index.php?title=Polar_coordinate_system&oldid=194048419"